CAN To Analogue Output Module (DAC01)

Log data from a CAN bus with data logging equipment not incorporating a CAN interface.

Converts CAN bus data into voltage and digital output.
7 digital outputs

4 analogue outputs

The CAN to Analogue/Digital Output Module (DAC01) is designed to convert CAN bus data into voltage and digital output. In this way it is possible to log data from a CAN bus with data logging equipment not incorporating a CAN interface.

Four analogue voltage outputs are available and these can be mapped using the VBOX Setup software to output virtually any CAN bus parameter. An example might be throttle position data read from CAN and converted into a 0 to 10 V signal.

The module is also equipped with seven digital outputs, of which four can be set as frequency generators.

Image: Configuration of the DAC01 is performed using VBOX Setup software

Specifications

Output Channels

4 Analogue Channels
7 Digital Channels

Output Sugnal Range

Analogue Voltage: 0 to +10VDC
Digital: 0V/+12 VDC

Resolution

Analogue Voltage: 12 bit, 2.44 mV per bit
Timer Compare: 16 bit

Power

Voltage Accuracy: ±0.1%
Power Supply Voltage: +12VDC (± 10%)

CAN

Type: CAN 2.0A or CAN2.0B Compatible
Baud Rates: 250Kbit/s, 500Kbit/s, 1Mbit/s

Dimensions

125mm x 119mm x 30mm