• email
  • facebook
  • X
  • phone
  • YouTube
  • contact

ALL NEW VBOX 4

Experience unparalleled versatility and precision in brake testing, ADAS sensor validation, and high dynamic testing with the all-new VBOX 4.

  • Resilient Data Capture: 100 Hz multi-constellation GNSS receiver with RTK.
  • IMU Integration: Combine with IMU05 to form Inertial Navigation System
  • Very low latency: 8.5 ±1.5 mS
  • Versatile Model Range: Three models, tailored for specific testing applications.
  • Full CAN Bus Logging: Capture the entire vehicle CAN Bus, including CAN FD.
  • Ethernet Connectivity: Seamlessly integrate with driving robots.
  • User configurable logging conditions
  • IMU integration

KEY FEATURES

    RTK as Standard

    100 Hz GNSS RTK receiver delivers cm-level accuracy when combined with an NTRIP modem or Base Station.

    Brake Trigger

    Capture the precise moment that braking starts, delivering brake stop accuracy to within ±1.8 cm..

    Full CAN Logging

    Take advantage of two dedicated CAN FD ports, an additional CAN Bus and a fourth Bus for Racelogic module input.

    Robot Compatibility

    Compatible with driving robots from all leading manufacturers including AB Dynamics, Humanetics, VEHICO and 4a.

    ADAS Testing

    VBOX 4 ADAS is engineered for complex ADAS testing that includes up to 5 moving and static targets, 3 road lines and 99 signposts.

    Free Lifetime Support

    RACELOGIC provide comprehensive support and software updates at no additional cost for the entire lifetime of your VBOX product.

    IMU Integration

    Combines seamlessly with VBOX IMU05 to improve data accuracy in challenging GNSS conditions.

    Easy Configuration

    All configuration can be done within the VBOX Setup software, including functionality that was previously only available via the VBOX Manager.

Which VBOX 4 is right for you?

    VBOX 4

    VBOX 4 Single Antenna is versatile and precise, making it an ideal choice for performance, brake, and tyre testing. It offers exceptional accuracy, with a velocity accuracy of 0.1 km/h and a brake distance accuracy of ±1.8 cm. Its straightforward setup ensures ease of use, effectively validating vehicle performance in braking, acceleration, coastdown, and pass-by noise testing.

    • 100 Hz GNSS RTK receiver
    • 2x CAN bus, 2x CAN FD ports
    • ±1.8 cm Brake stop accuracy
    • Ethernet / RS232 / USB / Bluetooth
    • 4 x Analogue inputs
    • 2 x Digital, 2 x Analogue outputs
    • <1 cm position accuracy with RTK
    • Pitch and roll angles with IMU integration

    VBOX4 Dynamics

    This model is the first choice for vehicle dynamics testing and well-suited for advanced handling tests, including ESC assessments, lane change maneuvers, and precise tire testing, delivering critical data on vehicle dynamics and stability. It stands out in scenarios where accurate slip angle measurements are essential.

    • 100 Hz GNSS RTK receiver
    • 2x CAN bus, 2x CAN FD ports
    • ±1.8 cm Brake stop accuracy
    • Ethernet / RS232 / USB / Bluetooth
    • 4 x Analogue inputs
    • 2 x Digital, 2 x Analogue outputs
    • <1 cm position accuracy with RTK
    • Pitch and roll angles with IMU integration
    • Measure slip at up to 5 vehicle locations

    VBOX4 ADAS

    Designed for cutting-edge ADAS and autonomous vehicle testing, VBOX 4 ADAS supports multi-vehicle/multi-target testing, allowing for installation in both subject and target vehicles. It is ideal for evaluating a variety of ADAS applications, such as Adaptive Cruise Control, Autonomous Emergency Braking, Lane Departure Warning, and Park Assist.

    • 100 Hz GNSS RTK receiver
    • 2x CAN bus, 2x CAN FD ports
    • ±1.8 cm Brake stop accuracy
    • Ethernet / RS232 / USB / Bluetooth
    • 4 x Analogue inputs
    • 2 x Digital, 2 x Analogue outputs
    • <1 cm position accuracy with RTK
    • Pitch and roll angles with IMU integration
    • Measure slip at up to 5 vehicle locations
    • Intuitive set-up software for ADAS Testing

    Full CAN Logging

    VBOX 4 automatically captures a vehicle’s entire CAN bus system, including CAN FD, without requiring pre-selection of channels. This ensures that no critical data is missed, eliminating the need for re-testing and allowing complete flexibility in data analysis.

    By logging the full CAN Bus upfront, specific channels can be selected later using the VBOX TEST SUITE analysis software. This enables data to be analysed in unlimited combinations, and pre-configured test plugins provide instant pass/fail results.

    VBOX 4 features two independent CAN ports, allowing it to synchronise two separate CAN buses into a single .asc file.

    Unrestricted CAN bus logging also supports sensors with rapid update rates, such as suspension damper rates. All sensor outputs are precisely synchronised with GNSS position data, ensuring accurate and reliable performance analysis.