• email
  • facebook
  • twitter
  • phone
  • youtube
  • email
  • auto1 GPS Data Loggers
    VBOX GPS data logging products vary from the
    10Hz VBOX Touch, perfect for simple testing
    and lap timing; through the 20Hz 2SX which
    brings together survey-grade GPS engines
    and CAN BUS logging; to the 100Hz VBOX 3i
    which is available in single, dual antenna
    & RTK variants,and which forms the basis
    of the VBOX ADAS testing packages.
  • auto2 ADAS testing
    With real-time measurements of parameters
    from up to three vehicles and at less than
    2cm positional accuracy, the Racelogic VBOX
    ADAS testing system allows developers to
    easily verify the effectiveness of their
  • auto3 Add-on Modules
    The VBOX range of modules allows Analogue,
    frequency, CAN, and thermocouple signals to
    be integrated into GPS data. A combination of
    module channels can be recorded simultaneously.
  • auto4 Displays
    VBOX displays offer a variety of real time
    results feedback and unit setup. The range
    includes a full tablet PC, MFD Touch,
    through to speed and lap timing units.


  • - The RACELOGIC DGNSS RTK Base Station is designed to improve positional accuracy of VBOX units and other compatible GPS/ GLONASS systems by calculating and transmitting differential correction data
  • - Correction message can be broadcasted in RTCM, CMR or proprietary RTK formats using an internal or mast mounted radio modem transmitter.
  • - Position accuracies of up to 2cm 95% CEP are available.
  • - Transmit and receive differential correction information (DGPS) from a RACELOGIC Base Station for local position correction.
  • - Transmit 'ADAS' data between 2-3 VBOX units, for live vehicle separation measurement.
  • - Transmit VBOX serial data from a remote unit to a laptop PC at a maximum rate of 20Hz.
  • - The VBOX NTRIP Modem allows a VBOX 3i RTK to receive positional correction data via Network RTK, without having to use a VBOX Base Station.