• email
  • facebook
  • twitter
  • phone
  • youtube
  • email
  • auto1 GPS Data Loggers
    VBOX GPS data logging products vary from the
    10Hz VBOX Mini, perfect for simple testing and
    lap timing; through the SX range which brings
    together survey-grade GPS engines and CAN BUS
    logging; to the 100Hz VBOX 3i which is
    available in single and dual antenna variants,
    and which forms the basis of the VBOX ADAS
    testing packages.
  • auto2 ADAS testing
    With real-time measurements of parameters
    from up to three vehicles and at less than
    2cm positional accuracy, the Racelogic VBOX
    ADAS testing system allows developers to
    easily verify the effectiveness of their
    products.
  • auto3 Add-on Modules
    The VBOX range of modules allows Analogue,
    frequency, CAN, and thermocouple signals to
    be integrated into GPS data. A combination of
    module channels can be recorded simultaneously.
  • auto3 Displays
    VBOX displays offer a variety of real time
    results feedback and unit setup. The range
    includes a full tablet PC, to LCD multifunction,
    to speed and lap timing units.

VBOX MODULES

  • - x,y,z accelerometers.
  • - x,y,z rate gyros.
  • - Temperature compensated.
  • - Splashproof IP67 rated.
  • - VBOX 3i integration.
  • SHOW ME MORE
  • - 8 channel 16 bit.
  • - Bipolar voltage measurement up to ±50v.
  • - 0.4mV DC accuracy.
  • - CAN Bus connection to VBOX.
  • - Synchronous sampling of all channels.
  • SHOW ME MORE
  • - 8 channel K Type.
  • - Thermocouple temperature range -269 to +1375 °C
  • - 24 bit Analogue to digital converter.
  • - 6V up to 30V input voltage.
  • - Cold Junction Compensated.
  • SHOW ME MORE
  • - 4 channel.
  • - Frequency based signals 1Hz to 20kHz.
  • - BNC connection for signal input.
  • - Dedicated fuel flow mode.
  • - CAN Bus connection to VBOX
  • SHOW ME MORE
  • - 8 analogue channels.
  • - 2 K-Type thermocouple channels.
  • - 2 digital/frequency channels.
  • - RPM input.
  • - Event marker input capability.
  • SHOW ME MORE
  • - 4 analogue channels
  • - RPM input.
  • - RS232 or CAN Bus output.
  • - Direct connection to VBOX loggers.
  • - Historic version for older ignition systems.
  • SHOW ME MORE
  • - Recognises 16 different variables being transmitted on a CAN bus.
  • - 125Kbit, 250Kbit, 500Kbit and 1Mbit CAN rates.
  • - Blocks VBOX data from vehicle CAN bus.
  • - Reads format in a CAN message, and then assign a name, multiplier, and offset.
  • SHOW ME MORE
  • - Converts CAN bus data into voltage and digital output.
  • - Four analogue voltage outputs.
  • - Seven digital outputs.
  • SHOW ME MORE
  • - Engine Speed and Road Speed output from CAN Bus.
  • - No configuration is necessary.
  • - Optional cable for use with a vehicle's OBD socket.
  • SHOW ME MORE
  • - 2 adjustable channels.
  • - Adjustable gain from 25 to 1000
  • - Full, half and quarter bridge applications.
  • - Output range ±9v.
  • SHOW ME MORE