• email
  • facebook
  • twitter
  • phone
  • youtube
  • email
  • auto1 GPS Data Loggers
    VBOX GPS data logging products vary from the
    10Hz VBOX Touch, perfect for simple testing
    and lap timing; through the 20Hz 2SX which
    brings together survey-grade GPS engines
    and CAN BUS logging; to the 100Hz VBOX 3i
    which is available in single, dual antenna
    & RTK variants,and which forms the basis
    of the VBOX ADAS testing packages.
  • auto2 ADAS testing
    With real-time measurements of parameters
    from up to three vehicles and at less than
    2cm positional accuracy, the Racelogic VBOX
    ADAS testing system allows developers to
    easily verify the effectiveness of their
    products.
  • auto3 Add-on Modules
    The VBOX range of modules allows Analogue,
    frequency, CAN, and thermocouple signals to
    be integrated into GPS data. A combination of
    module channels can be recorded simultaneously.
  • auto3 Displays
    VBOX displays offer a variety of real time
    results feedback and unit setup. The range
    includes a full tablet PC, MFD Touch,
    through to speed and lap timing units.

GPS DATA LOGGERS

  • - 100 Hz GPS/ GLONASS data logging
  • - RTK option for cm-level accuracy
  • - Brake distance accuracy within ±1.8cm for a typical 100-0kph brake stop.
  • - 2 x CAN Bus interface
  • - ±1.8 cm brake stop accuracy
  • - IMU integration
  • - Slip and pitch/roll angles
  • SHOW ME MORE
  • - Multi-constellation and dual frequency 100 Hz GNSS RTK receiver
  • - Combines IMU and wheel-speed data to maintain accuracy
  • - Resilient RTK for reliable test-track and open road testing
  • - Intuitive set-up software for complex ADAS scenarios
  • - Free lifetime customer support
  • SHOW ME MORE
  • - 20 Hz update rate
  • - High contrast OLED screen display & buttons for basic configuration
  • - Connects to all VBOX input modules
  • - Two sets of analogue and digital outputs.
  • SHOW ME MORE
  • - 10Hz GPS engine with built-in GPS antenna.
  • - 4.3" TFT daylight readable capacitive touch screen.
  • - Built-in applications such as performance testing, braking, lap timing, speedometer and data logging
  • - Python-based applications, ideal to customise to your own testing needs
  • - Connects to Vehicle Can Bus (CAN Interface 2.0)
  • SHOW ME MORE
  • - 10 Hz GNSS data logging.
  • - Outstanding RTK performance.
  • - Integrated NTRIP link.
  • - Cost-effective PNT.
  • - CAN Bus output for 3rd party connection.
  • SHOW ME MORE
  • - 10Hz GPS engine.
  • - Small size and water resistant (IP66).
  • - Log rates can be configured from 10Hz down to 1 sample per minute.
  • - CAN interface allows data to be logged from a vehicle's CAN bus.
  • - Can be connected to any VBOX module.
  • SHOW ME MORE